Wig Chemical Product category 5

G7011-STH + G7044-STH

Strong, Tough & Flexible Two-Component Adhesive Mixture
For Genius Wefts, Skin Wefts, Tape-In Hair Extensions & Machine-Made Wig Wefts
WigSchool
Category 1Category 2Category 3Category 4Category 5Category 6Category 7

Strong Hair Bonding — Tough Yet Soft & Flexible

The mixture of G7011-STH and G7044-STH forms a very strong, tough, yet soft and flexible adhesive layer. The mixture is suitable for reinforcing hair wefts and forming PU skin layers. Its stiffness and flexibility can be adjusted by selecting an appropriate mixing ratio for the intended manufacturing method.

G7011-STH + G7044-STH refers to the mixture of two components, not two unrelated finished adhesives. We use the singular expressions the mixture and the two-component adhesive system when discussing the material after mixing.

Previous product codes: G7011-TH + G7044-TH; G7011-S + G7044-T.   STH = Skin Tape Hair; TH = Tape Hair.

Key Features & Manufacturing Advantages

1. Strong Hair Bonding: Holds hair strands securely in the weft and helps reduce loosening and shedding.

2. Toughness & Tear Resistance: Helps protect the adhesive layer and the material around punched holes or perforations from tearing under normal loads.

3. Softness & Flexibility: A strong adhesive layer can remain soft and bendable, rather than becoming excessively rigid.

4. Elastic Recovery: A hole may temporarily change from circular to oval when pulled, then return close to its original shape after the force is removed.

5. Adjustable Stiffness: The finished layer can range from soft and flexible to relatively firm or stiff, depending on the recommended mixture and process conditions.

These properties are useful for Genius Wefts, perforated wefts, skin wefts, sew-in and beaded-row hair extensions, as well as wefts used in conventional machine-made wigs, including wefts sewn to wig caps.

Illustration of weft seam height Machine-sewn wefts with adhesive bonding

Why Tear Resistance Around Weft Holes Matters

Some hair-extension installation methods use small holes through the weft attachment band so that needles, threads, or other fittings can pass through. The edges of these openings may receive repeated pulling forces. A weak or brittle layer can tear, permanently stretch, or deform. Our G7011-STH + G7044-STH mixture is intended to combine strong bonding with a tough and flexible layer that resists these problems.

Practical Demonstration — Approximately 320 g

In a practical demonstration, I applied the adhesive mixture around a hole in my personal mobile phone wallet, which is connected to a neck strap by a metal ring. The phone and wallet together weigh approximately 320 g. Under the weight, the round hole stretches slightly into an oval shape. When the load is removed, it returns almost completely to its original shape, with no visible tearing or permanent deformation in my observations.

In ordinary hair-extension use, the hair weight is distributed across multiple attachment points. As an illustrative comparison, a load of less than 10 g at one hole is less than one thirty-second of 320 g. This is not a measured universal load for all hair extensions; combing, pulling, hole size, seam thickness, and installation methods can change the actual force and performance.

This wallet example is a field demonstration, not a standardized tensile, tear-resistance, or durability test. It does not establish a certified load rating.

Comparison with G749-STH

FeatureG749-STHG7011-STH + G7044-STH Mixture
SystemOne-component adhesive / coating materialTwo-component adhesive mixture
Main useFormation of soft, flexible PU skin layersStrong hair bonding, weft reinforcement and PU skin-layer formation
Soft & flexible skin layerYesYes
Adjustable stiffnessDepends on formulation and processCan be adjusted using recommended mixing ratios
Perforated weft applicationsSpecific performance not compared hereToughness, tear resistance and elastic recovery are key intended advantages
Typical applicationsGlued skin wefts and tape-in productsGenius wefts, perforated and machine-sewn wefts, wig wefts, skin wefts

The descriptions reflect our manufacturing experience. They are not standardized side-by-side test results, and performance depends on the exact formula, mixing and curing conditions.

Mixing, Viscosity & Supply Information

Both components are supplied as relatively thick liquids. They are mixed together before application, and a suitable solvent may be used where required to adjust the working viscosity. We provide the appropriate solvent information and recommended ratios for the intended application.

Component mixing ratios: G7011-STH : G7044-STH = 1:4, 1:3, or 1:2, depending on the desired properties and manufacturing conditions.

Example with solvent: G7011-STH : G7044-STH : Solvent = 1 : 4 : 5 to 15, corresponding to a solvent quantity of approximately 1–3 times the combined quantity of the first two components. This is an illustrative ratio from our existing guidance; use the appropriate recommended solvent and mixing procedure for the application.

Minimum packaging: 1 liter of each component (approximately 1 kg per liter, based on our stated packaging reference). For an initial trial with a 1:2 component ratio, a customer might require 1 liter of G7011-STH and 2 liters of G7044-STH, subject to packaging availability.

Solvent availability and price depend on the country, supplier, and purchase quantity. Where suitable, purchasing the solvent locally can help reduce international shipping expenses.

Prices and quantity discounts: See our separate G7011-STH / G7044-STH price page. Freight, payment fees, and other charges are handled according to the quotation and payment information.

Manufacturing Training & Technical Know-How

Purchasing our adhesive components does not include full manufacturing training. Making tape-in extensions, skin wefts, and machine-made wig wefts also requires proper preparation, adhesive application, drying or curing, and finishing. We provide detailed manufacturing techniques through our separate paid training courses.

Training information Class 21-GG Online Training Materials Set — US$1,500.00, including shipping costs. View course details View details

Related process: Class 21-WW — Sewing & Adhesive Bonding Method.

Raw Hair Processing and Coloring Hair Curling Advanced Hackling
Email WigSchool.com JK-HairCoat G660W WigSchool
Wig Adhesive Wig Clips

Copyright © JOHN KOREA CO. · All Rights Reserved — Seoul, Korea